Which nails for skirting boards

I've used both in the past. Thermo , 10 Feb Thx Thermo. You must log in or sign up to reply here. Show Ignored Content.

Related Threads. Best bit for multi tool for skirting and stuck chuck Keitai , 19 Oct , in forum: Tools and Materials. Start the holes 50mm from the end of the wall and position each one 25mm from the top and bottom of the skirting. Repeat this pattern at mm along the length of the skirting. Countersink the holes so that the screws will be hidden, i.

Insert a 6mm wall plug and an 8-gauge screw, tapping into place until you feel resistance. Then screw until the head is below the surface of the skirting. Use a hammer and nail stud to push the nails below the surface of the skirting. When fitting and securing an external joint you need to apply PVA glue to the face of each mitre cut. When securing internal joints the square cut section is always fitted first. So simply align the scribed section and secure the board.

No PVA glue is required for internal joints. Smooth the surface and wipe away any excess with a damp cloth. Finally, all countersunk nails and screws should be filled and sanded down. Now the skirting is ready to paint.

My Account. Order line. How to fit skirting boards. What is the best way to fit skirting boards? Remembered your password? Back to login. Already have an account? Login here. For the uninitiated, choosing the right nails for skirting board can seem a little daunting.

The reality is that you may not even need nails at all and with a few minutes of planning you can ensure you have everything you need to install your new skirting boards as soon as they arrive. There are times where nails or screws should be used for attaching skirting boards to walls.

The need for nails really comes down to what you are fixing your skirting on to and how even the walls are. If you have masonry walls then the best option is usually going to be to use a mixture of adhesive such as Gripfill we supply standard and solvent free Gripfill and masonry screws or nails.

For plastered walls or plasterboard with timber studs, then you can use either an adhesive on its own or a mix of adhesive and oval wire nails — ensuring that you nail these in line with the timber studs.

When fixing your skirting board to masonry walls you will need to make sure that you use masonry nails or screws. The most common joints are internal and external. Internal corners face inwards, and external corners outwards. Use a mitre box and a panel saw, a precision mitre saw, or an electric compound mitre saw if you have one. If using a mitre box, you may need to use it with a bench, or you can fix it in place with screws to an off cut of wood.

Mark the position of the corner on the back edge of the skirting. Make a note of what angle the cut needs to go. One way to do this is make a temporary direction mark on the skirting near to the cutting mark. Hold the skirting board firmly in place and make the cut.

This is where one part of the skirting board is cut square, and the end of the other piece is shaped to the profile of the skirting board. The profiled piece simply pushes up to the face of the square cut piece.